buzzkillb

This is updating every 24 hours now.

For some reason AMD64 and ARM chaindata's are not compatible. So I split them up here. https://chaindata.pos.watch/

Restarting the wallet should help get past where its getting stuck. Otherwise latest chaindata is located here https://chaindata.pos.watch/

I am keeping up to date chaindata here, as of now it should updated about every 3 days.. https://chaindata.pos.watch/ ARM really doesn't like to sync with the AMD64 (typical Intel/AMD PC/Windows/MacOS) version so I have an ARM wallet daemon setup as well for this. For a Raspberry Pi4 or other ARM board/VPS you probably want the ARM pichaindata.

Download Denarius Wallet Install IPFS (locally or vps) https://docs.ipfs.io/guides/guides/install/ Ubuntu (AMD64) Find latest here - https://dist.ipfs.io/#go-ipfs wget https://dist.ipfs.io/go-ipfs/v0.4.22/go-ipfs_v0.4.22_linux-amd64.tar.gz tar xvfz go-ipfs_v0.4.22_linux-amd64.tar.gz cd go-ipfs sudo ./install.sh ipfs version #start ipfs node and take note of your IPFS node ID ipfs init #example output ``` initializing IPFS node at /home/travanx/.ipfs generating 2048-bit RSA keypair...done peer identity: QmNyud5DGEmkBGYcV4QA69JHiTuWLU6EkStpviddZTgiag to get started, enter: ipfs cat /ipfs/QmS4ustL54uo8FzR9455qaxZwuMiUhyvMcX9Ba8nUH4uVv/readme ``` #try reading the readme ipfs cat /ipfs/QmS4ustL54uo8FzR9455qaxZwuMiUhyvMcX9Ba8nUH4uVv/readme #start IPFS service ipfs daemon denarius.conf jupiterlocal=1 if you want to specify your IPFS server and its not local add jupiterip=yournodeIP:5001 To upload a file #example command to upload using daemon or QT from debug console, other use the Jupiter tab in the QT jupiterupload /home/USERNAME/Downloads/denarius-256.png Carsen uploaded the below image using localhost, then turned off his localhost IPFS server and because Denarius is amazing the file still shows up.

Example of the type of spam.

Blocklist located here -> https://github.com/buzzkillb/hosts I am using this on pihole and will be updating the links anytime I get dm spam, mainly from Discord. Raw File -> https://raw.githubusercontent.com/buzzkillb/hosts/master/hosts How to add to pihole.

Mine randomx on Manjaro. I assume same thing to run on Arch btw #compile xmrrig on Manjaro sudo pacman -S base-devel cmake libuv libmicrohttpd openssl hwloc libutil-linux git clone https://github.com/xmrig/xmrig.git cd xmrig mkdir build && cd $_ cmake .. make

Grab the latest QT wallet with IPFS built in and have 0.1 D or at least something small to pay the PoD fee. IPFS is free and can skip the PoD portion of this if you just want to upload files. Lets pick a good file to Proof of Data against and then upload into IPFS. Current Release: https://github.com/carsenk/denarius/releases/tag/v3.3.9.6 QT Wallet: https://github.com/carsenk/denarius/releases/download/v3.3.9.6/Denarius-v3.3.9.6-Win64.zip Download a file, I am going to use the denarius logo from denarius.io and lets proof of data this and upload to IPFS as a great example of how powerful this is. Here's a link but just right click the image on the homepage and save to your hard drive. https://i2.wp.com/denarius.io/wp-content/uploads/2017/11/denarius-256.png?w=256&ssl=1 Go to the Jupiter Tab Select your file, in this case select the image file we just downloaded. Click Upload to IPFS (The Wallet will freeze while the upload is taking place) After the upload you will get an IPFS Hash along with being able to click the link to see the file in your web browser. Success, and currently there are file limits on uploading through the wallet. I was not able to upload the QT.zip yet. Lets Proof of Data this file for good measure, so the original hash is located on the Denarius blockchain. Go to Proof of Data tab in QT Wallet Select our image, then put a simple narration in and then click Create Timestamp This now gives us a D address where the hash matches the image. Now if we download the image we uploaded to IPFS we can verify the file against the blockchain by checking against PoD again. Here is our set in the blockchain address based on the image file or can Click Check Transaction to get to your PoD transaction. https://www.coinexplorer.net/D/address/DQQxYgD1KPzmoQGeL1JyXZk2JhZPfiaXsY

for ipfs branch sudo apt install libcurl4-openssl-dev

Added screenshot to first post in how the list showed unregistered as one daemon being tracked lost sync. Useful already.

What the index.html looks like to add the row header to the above. index.html <html> <head> <title>FortunaStake List</title> <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/animate.css/3.7.2/animate.min.css"> <script type="text/javascript" src="block.js?version=0.1337"></script> <script type="text/javascript" src="fortunastake.js?version=0.1337"></script> <link rel="stylesheet" type="text/css" href="style.css?version=0.1337"> </head> <body> <div class="row"> <div class="col">FortunaStake List</div> </div> <div class="row"> <div class="col">Block #<div id="block"; style="display:inline-block"; class="animated rubberBand"></div></div> </div> <div class="row"> <div class="col">FS #</div> <div class="col">IP Address</div> <div class="col">Address</div> <div class="col">Status</div> <div class="col">Earnings</div> </div> <div id="fsnumber"></div> </body> </html>

This is a lot easier than it looks, and a super easy way to watch the status of your Fortunastakes (masternodes) from anything, including a raspberry pi. If you have multiple fortunastakes, somehow you want to get each json of your fortunastake status onto a single nginx server. Depends a lot on how to go about this. I am using blocknotify on the daemon to create 1.json and 2.json files, also grab the current block from blocknotify send that to block.txt, sending these files to /var/www/html and then making sure permissions are what I want. Install nginx on your ubuntu you will be using. sudo apt install nginx Verify that works by going to your ip address. I am doing everything on a local network, this is gonna vary, but if its working you should see the default nginx welcome screen. denarius.conf (change the full path to your server, maybe /home/username/status.sh) blocknotify=/root/status.sh status.sh (creates block.txt and iterates through 2 fortunastakes on same server at directories /root/D01 and /root/D02, i<3 is +1 of the number you are running if on same server) #!/bin/bash denariusd -datadir=/root/D01 getblockcount > /var/www/html/block.txt #stop and start 01-02 for ((i=1; i<3; i++)) do echo "$i" denariusd -datadir=/root/D0$i fortunastake status > /var/www/html/$i.json chmod -R 644 /var/www/html/* done Restart the daemon and on the first new block status.sh will run and send the files into /var/www/html. Double check the directory has some files after running for a bit. Basically you want to get each of your Fortunastakes json files into your /var/www/html, maybe even using scp from multiple vps's. Just make sure to label them 1.json 2.json 3.json and so forth for how we will iterate through these json files. example of using scp command way to do it, you want ssh-key login if using scp scp 2.json [email protected]:/var/www/html/2.json Create 4 files we will use to create the website, stick them in /var/www/html folder style.css body { background: #020000; font-family: 'Raleway', sans-serif; font-size:16px; } .row { display: flex; flex-wrap: wrap; } .col { flex: 1 0 18%; /* The important bit. This percentage decides your columns. The percent can be px. It just represents your minimum starting width. */ margin: 0.5px; background: #333333; height: 30px; color: white; display: flex; align-items: center; justify-content: center; } /* visited link */ a:visited { color: white; } /* unvisited link */ a:link { color: white; } fortunastake.js fetchData = () => { const urls = [ "1.json", "2.json" ]; const allRequests = urls.map(url => fetch(url).then(response => response.json()) ); return Promise.all(allRequests); }; fetchData().then(arrayOfResponses => { for (index = 0; index < arrayOfResponses.length; index++) { window.FS = '<div class="row">' + '<div class="col">FS' + [index+1] + '</div>' + '<div class="col">' + (arrayOfResponses[index].local.service) + '</div>' + '<div class="col">' + '<a href="https://www.coinexplorer.net/D/address/' + (arrayOfResponses[index].local.payment_address) + '">' + (arrayOfResponses[index].local.payment_address) + '</a></div>' + '<div class="col">' + (arrayOfResponses[index].local.network_status) + '</div>' + '<div class="col">' + parseFloat((arrayOfResponses[index].local.earnings) / 100000000).toFixed(8) + '</div>' + '</div>'; console.log(window.FS) $("#fsnumber").append(window.FS).hide().fadeIn("fast"); } } ); block.html fetch('block.txt', {mode: 'no-cors'}) .then(function(response) { return response.json(); }) .then(function(data) { if (data) console.log(data); $('#block').html(""); $("#block").append(data).hide().fadeIn("slow"); }) .catch(function(err) { console.log(err); }); var listen = setInterval(function() { fetch('block.txt', {mode: 'no-cors'}) .then(function(response) { return response.json(); }) .then(function(data) { if (data) console.log(data); $('#block').html(""); $("#block").append(data).hide().fadeIn("slow"); }) .catch(function(err) { console.log(err); }); }, 30000);//30 second index.html <html> <head> <title>FortunaStake List</title> <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script> <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/animate.css/3.7.2/animate.min.css"> <script type="text/javascript" src="block.js?version=0.1337"></script> <script type="text/javascript" src="fortunastake.js?version=0.1337"></script> <link rel="stylesheet" type="text/css" href="style.css?version=0.1337"> </head> <body> <div class="row"> <div class="col">FortunaStake List</div> </div> <div class="row"> <div class="col">Block #<div id="block"; style="display:inline-block"; class="animated rubberBand"></div></div> </div> <div id="fsnumber"></div> </body> </html> Go back to your nginx IP and force refresh by using shift+ctrl+r and now you can start watching your Fortunastake Status from wherever. This uses a 5 column flex grid and has clickable link to coinexplorer per address and auto refreshes the block count every 30 seconds. This does not autorefresh the FS list though. FS # | IP Address | FS Address | Status | Round Earnings What it shows when one goes down from the list. This particular one lost sync on the daemon, and still shows active as I restarted the QT. Was about to get bumped off to inactive and REKT.

Reduce bandwidth as much as possible running the QT wallet or daemon. 500megs is a good starting point for max upload daily (this is a suggestion and won't cap completely at this number), 8 connections is the minimum for peer2peer to work. And should use listen=1, but if trying to run this on low bandwidth capped ISP try below. denarius.conf maxconnections=8 maxuploadtarget=500 listen=0 or run with flags -maxconnections=8 -maxuploadtarget=500 -listen=0

need to start these services sudo systemctl start pcscd.service sudo systemctl start pcscd.socket