Jump to content


  • Content Count

  • Joined

  • Last visited

  • Feedback


Community Reputation

0 Neutral

About greentech5

  • Rank
    Junior Denarian
  1. Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.=========================Latest version is v14.7 - Supercharged Edition:- now the miner driver does not require switching Windows to Test Mode. If you want to turn Test Mode off, use "-driver uninstall" option (with admin rights) and reboot, then start miner with admin rights to install new driver automatically when necessary (or use "-driver install" option directly). If you have any problems with signed driver you can use "-driver install_test" option, it uses old approach: enables Test Mode (reboot is required) and installs unsigned driver.- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.- updated Remote Manager to show total power consumption.- fixed issue with "-logsmaxsize" option when "-logfile" option is used to specify directory for log files.- a few minor bug fixes and improvements.DOWNLOAD LINK: MEGA - https://mega.nz/#F!LQ1WRIbK!M4rh7maZb7crTJ_QkPa1Owversion is v14.6 - Supercharged Edition:- now "-rxboost" option also supports old AMD cards (Hawaii, Tonga, Tahiti, Pitcairn), use "-rxboost 1" to improve hashrate up to 5% by applying some additional memory timings.- now "-rxboost" option supports all AMD drivers.- now "-strap" for AMD cards also supports AMD blockchain drivers.- some changes to further reduce stale shares a bit.- added "-minspeedtime" option.- added statistics for shares accepting time (min/max/average), press "s" to see it.- updated Remote Manager to show shares accepting time.- a few minor bug fixes and improvements.FEATURES:- Supports applying optimized memory timings (straps) on-the-fly in Windows, without flashing VBIOS (currently Polaris, Vega, Nvidia 10xx cards only), up to 20% speedup. Best straps for Ethereum are included.- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.- Supports both AMD and nVidia cards, even mixed.- No DAG files.- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.- Supports Ethereum and Siacoin solo mining.- Supports both HTTP and Stratum for Decred.- Supports both HTTP and Stratum for Siacoin.- Supports Stratum for Lbry, Pascal, Blake2s, Keccak.- Supports failover.- Displays detailed mining information and hashrate for every card.- Supports remote monitoring and management.- Supports GPU selection, built-in GPU overclocking features and temperature management.- Supports Ethereum forks (Expanse, etc).- Windows and Linux versions.This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.For old AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility.For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.For AMD cards, set the following environment variables, especially if you have 2...4GB cards:GPU_FORCE_64BIT_PTR 0GPU_MAX_HEAP_SIZE 100GPU_USE_SYNC_OBJECTS 1GPU_MAX_ALLOC_PERCENT 100GPU_SINGLE_ALLOC_PERCENT 100This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer. For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case.If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup.Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option.Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate. Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.This version is for recent AMD videocards only: 7xxx, 2xx and 3xx, 2GB or more. Recent nVidia videocards are supported as well.CONFIGURATION FILEYou can use "config.txt" file instead of specifying options in command line. If there are not any command line options, miner will check "config.txt" file for options.If there is only one option in the command line, it must be configuration file name.If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.Place one option per line, if first character of a line is ";" or "#", this line will be ignored. You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt. If for Ethereum-only mining:ethpool:EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw xsparkpool:EthDcrMiner64.exe -epool eu.sparkpool.com:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw xf2pool:EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1nanopool:EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1nicehash:EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0Ethereum forks mining:EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1Ethereum SOLO mining (assume geth is on "epools.txt" and "dpools.txt" files to specify additional pools (you can use "-epoolsfile" and "-dpoolsfile" options to use different filenames). These files have text format, one pool per line. Every pool has 3 connection attempts. Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.If the first character of a line is ";" or "#", this line will be ignored. Do not change spacing, spaces between parameters and values are required for parsing.If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.You can reload "epools.txt" and "dpools.txt" files in runtime by pressing "r" key.Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list. If no pool was specified in the command line then first pool in the failover pools list is main pool.You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.You can also use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.You can also select current pool in runtime by pressing "e" or "d" key.REMOTE MONITORING/MANAGEMENTMiner supports remote monitoring/management via JSON protocol over raw TCP/IP sockets. You can also get recent console text lines via HTTP.Start "EthMan.exe" from "Remote management" subfolder (Windows version only).Check built-in help for more information. "API.txt" file contains more details about protocol.KNOWN ISSUES- AMD cards: on some cards you can notice non-constant mining speed in dual mode, sometimes speed becomes a bit slower. This issue was mostly fixed in recent versions, but not completely.- AMD cards: in Linux with gpu-pro drivers, the list of GPUs may differ from the list of temperatures. You can use -di to change order of GPUs to match both lists.- nVidia cards: dual mode is not so effective as for AMD cards.- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions. I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad. Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.TROUBLESHOOTING1. Install Catalyst v15.12 for old AMD cards; for Fury, Polaris and Vega cards use latest blockchain drivers.2. Disable overclocking.3. Set environment variables as described above.4. Set Virtual Memory 16 GB or more.5. Reboot computer.6. Check hardware, risers.7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.FAQ- Miner works too slowly when I mine ETH/ETC but works fine when I mine some ETH fork.Check if you enabled "Compute Mode" in AMD drivers, also you can press "y" key to turn on "Compute Mode" in AMD drivers for all cards (Windows only).- I cannot mine ETH/ETC with Nvidia 3GB card in Windows 10.Windows 10 internally allocates about 20% of GPU memory so applications can use only 80% of GPU memory. Use Windows 7 or Linux.
  2. Hi, At NiceHash (I'm sure you've already heard about us) we're running a multi-algo cloud mining service and multipool. Thus we're striving to get unified and feature-full GPU miner. That's why we've sponsored the integration of sph-miner + keccak (from cgminer) + x11_mod (from lasybear) + NIST5 algo and some more stuff into unified, runtime-kernel-switching new version of the original official sgminer. sgminer has since then been redefined from "scrypt-miner" to "GPU OpenCL miner" and thus strive to support wide range of algorithms for GPU mining. New algorithms are added over time as well as some new features. For the record: I'm not a developer of sgminer and haven't contributed any coding for sgminer, but was active in proposing and coordinating new features development. All the credits go to the many sgminer developers, listed in arhiv. NiceHash organization took over the initiative to continue development on this widely spread open-source mining software, therefore the most recent source code and releases can be found in the information below. RELEASES Binaries downloads are available here: i386 - https://mega.nz/#!jNsmyaoD!ufrEeDes4rqu_TPAn5q86bp2MySrXgKRTlk8_a1MtZE AMD64 - https://mega.nz/#!HQ1VVIyA!qGKA9yaHsNUel5WZyH7F5ulw4DrElOY4fngkDGI-6l8 Please note: sgminer is still in development, you should regularly, so there are might be still some open issues and minor bugs present. Here is an example of multi-algorithm configuration (you can add many pool-specific options): Code: { "pools" : [ { "name" : "NiceHash_X11", "url" : "stratum+tcp://stratum nicehash com:3336", "user" : "btc_addr", "pass" : "x", "nfactor" : "10", "algorithm" : "darkcoin-mod" }, { "name" : "NiceHash_X13", "url" : "stratum+tcp://stratum nicehash com:3337", "user" : "btc_addr", "pass" : "x", "nfactor" : "10", "algorithm" : "marucoin-mod" }, { "name" : "NiceHash_SHA3", "url" : "stratum+tcp://stratum nicehash com:3338", "user" : "btc_addr", "pass" : "x", "nfactor" : "10", "algorithm" : "maxcoin" }, { "name" : "NiceHash_Scrypt-N", "url" : "stratum+tcp://stratum nicehash com:3335", "user" : "btc_addr", "pass" : "x", "nfactor" : "11", "algorithm" : "zuikkis" }, { "name" : "NiceHash_Scrypt", "url" : "stratum+tcp://stratum nicehash com:3333", "user" : "btc_addr", "pass" : "x", "nfactor" : "10", "algorithm" : "zuikkis" } ] "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", ... other configuration settings ... Of course you can choose any and as many pools you prefer, NiceHash pools were given just as an example. Your miner will be able to switch to different pools using different algorithms at runtime, without any interruption and without sgminer restart. You can also set GPU settings and some other settings at a per-pool level to get optimum performance on various pools with various algorithms with a single configuration file. Now you can mine Litecoin, Dogecoin, Vertcoin, Darkcoin, Maxcoin, MaruCoin ... you-name-it with a single unified sgminer. Note: sgminer v5 intoduced new stratum extranonce subscription; some pools ignores connection when sgminer sends extranonce subscription request, therefore you just have to add "no-extranonce" : true setting to the pool config for pools, that doesn't support extranonce-subscribe - this kind of pools appears Dead even if they are suposed to be working fine (you should never use this setting on nicehash pools since nicehash stratum proxy provides better efficiency with extranonce subscription) Code: { "url" : "stratum+tcp://some-pool:3333", "no-extranonce" : true, "user" : "username", "pass" : "x", } Or if you're using command line options, example for quark mining: Code: sgminer --algorithm quarkcoin --no-extranonce -I 18 -g 1 -w 256 -o stratum+tcp://some-quark-pool:3333 -u ... -p ... All interested developers, please, feel free to contribute to the code by simply pushing Pull request to the Github repository (see above). Again, thanks to all the great developers of sgminer and kind regards Handle Decred new stake version field. Assets6 5.6.0 Added support for PascalCoin Pascal algorithm. Binaries downloads are below. Assets6 5.5.0a Added support for sibcoin X11-Gost algorithm. Binaries downloads are below. Assets6 5.5.0 Added support for Lbry and Sia algorithm with NiceHash compatible stratum protocol. Assets6 v5.4.0-tweaked Special release for the optimized kernel binaries, used in NiceHash Miner. 64-bit binaries only. Assets4 5.4.0 Added support for Decred algorithm with NiceHash compatible stratum protocol. Binaries downloads are below. Assets6 5.3.0 Added Blake256 algorithms (Blake256 8-rounds, Blake256 14-rounds and Blake256 8-rounds for Vanillacoin). Added optimized neoscrypt kernel. Fixed displaying GPUs in console when only particular GPUs are enabled by startup parameters. A few other minor bugfixes. Binaries downloads are below. Assets6 5.2.1 support for several algorithms, including X11, X13, Keccak, NeoScrypt, Lyra2REv2, Quark, etc. includes sample running configuration file bundled with optimized .bin kernels by Wolf0 for X11, X13 and X15 on Pitcairn, Tahiti and Hawaii built for Windows
  3. T-Rex miner for modern NVIDIA GPUs - Maxwell and newerSupported algorithms:x16r x16rt mtp x16s x17 x22i x25x x21s geek dedal bcd hmq1725 honeycomb sha256t sha256q timetravel lyra2z bitcore sonoa renesis balloon polytimos skunk c11 phi tribus GLT algos: astralhash, jeonghash, padihash, pawelhashRuns on both Linux and Windows.DownloadsWin: https://mega.nz/#!zAcXGapA!tZKGGHleTQy1selQuSbvYA9lzeXBs6DBrfwivjP705wLinux: https://mega.nz/#F!7UM12Iga!WqFyRsaRWjP2_CChGLzhrAUsageT-Rex supports command line arguments similar to that of ccminer:x16r:Code:t-rex -a x16r -o stratum+tcp://eu.minermore.com:4501 -u <wallet> -p xMTP:Code:t-rex -a mtp -o stratum+tcp://xzc.2miners.com:8080 -u <wallet> -p xTo get the full list of supported options run:Code:t-rex -hDev feeDev fee is set to 1%. When the miner starts and stops mining dev fee it reports it to the console output.Release notes0.12.0Add honeycomb algorithm (Beenode coin)Fix "GPU ... is idle" error when there is a pool connection problem0.11.1Significant x25x speed increaseNew features:Use environment variables in config files. Use %YOUR_ENV_VAR% in any config file field and it will substitute it with the value of YOUR_ENV_VAR environment variable set in your systemBug fixes:Temperature limit bug (GPU got disabled if there was problems with NVML)P2pool fixShow NVML errors and unsupported featuresTruncate MTP share log message when using --protocol-dumpFix start-up failure in some cases for CUDA 9.1 builds0.11.0Add x25x algo (will be used by SUQA/SIN after the fork)Bug fixes (built-in watchdog):Miner fails to start when using Windows task scheduler or Awesome MinerMiner restarts on Linux/Hive OSPreserve a single log file across miner restartsNOTE: Using built-in watchdog is encouraged. If you experience any issues with it, please let us know0.10.2Add MTP algo (Zcoin)Add Tesla P100 supportAdd built-in watchdog (can be disabled using --no-watchdog parameter)Default network timeout increased from 3 to 5 minutesNew parameter --hide-date to hide date part of the timestamp in the consolePrevent Windows from going to sleep mode while T-Rex is runningBug fixes:"does not validate on CPU" error on RTX cards (CUDA 10 builds)Long dev fee sessions if system clock "jumps"GPUs keep hashing even if the pool connection is lost0.9.2Add support for GIN (x16rt)Cosmetic changes:1) New parameter --ab-indexing to enable Afterburner-like GPU indexing2) Web-monitoring page enhancementsBug fixes:CentOS 7 compatibility issue0.9.1Add algos: x16rt (Veil), sha256q (Pyrite)Minor performance improvements for x16r, bcd, x22i and other x16-like algorithmsMultiple web monitoring page improvements* Switch between multiple config files dynamically (put your *.config files into the miner directory)* Dark themeBug fixes:cURL/SSL compatibility issue on newer Linux distros (Ubuntu 18, Debian 9)Miner wouldn't start if NVML wasn't installed0.8.9Performance improvements: +2-3% for x16 family of algorithms (x16r, bcd, x17, x22i etc.)Add config parameter: --no-nvml - Disable NVML GPU stats.Display miner version next to "Uptime" info.0.8.8Fix "result for ... does not validate on CPU!" errors on x21s and dedal0.8.6Add algos: astralhash, jeonghash, padihash, pawelhash (used by GlobalToken, can be mined atPerformance improvements: a few percent to x16r family of algorithms, skunk, x22iHighlight GPU temperatures in green/yellow/red. Temperature ranges are configured with --temperature-color parameterBug fixes:Invalid shares on Dedal for some hashordersNot identifying a found block when mining x22i0.8.5Performance improvements: x22i +5%0.8.4Performance improvements: x22i +1-4%0.8.3New algo: x21s (Ritocoin).New config parameter: --sharerate-avr - Sliding window length in seconds used to compute sharerate (default: 600).0.8.2New algo: dedalImprove x22i: +1-3%Fix skunk performance issue introduced in improvements: x22i +10-20%Bug fixes:Miner hangs on start up when it doesn't receive authorize message response0.8.0New algo: geek (GeekCash coin)Performance improvements (1-3%) of x16-like algorithms for GTX/RTX cards.Added watchdog. Replace "t-rex.exe" with "watchdog.exe" in your bat file in order to use it.Watchdog lets you update T-Rex using the monitoring web page or perform auto-updates if launched with "--autoupdate" parameter, and also restarts the miner if it hangs for any reason.Default value for "-N" paramater increased from 30 to 60 seconds.Added "shares per minute" stats read-out.Bug fixes:"stratum+tcp://" pool URL prefix is no longer mandatoryReduce CPU load when using large "-N" parameter values"Clean jobs" feature removed in the previous release is backHung on Ctrl+C in Windows0.7.4Minor performance improvements for skunk and x16 family of algorithms for Pascal and Turing cardsBug fixes:Crashes 20 sec after dev fee session when using -r 0Temporary backed out "clean job" feature that was causing rejects on some pools e.g. beepool and bitpoolminingFix average hashrate reporting when using large -N values (over -N 4294)0.7.3Improve skunk, phi, polytimos; small improvements for x16r/s etc on some configurations.Performance improvements for Turing GPUs (20xx series)Add functionality to return to the main pool after mining on failover ones (see --back-to-main-pool-sec launch parameter)Handle client.reconnect stratum messages (used by MiningRigRentals)Handle clean jobs stratum flag correctly (resulting in fewer stale jobs) - this feature is supported by coinblockers.comAdd file handler to API. Allows to create custom files in miner directory via API.Add functionality to keep your failover pools separately in a config file. May be helpful if you need to load pools from file. (t-rex -c pools.json -a x16r <your parameters>)Bug fixesRemove assert on NULL rpath in Linux.Fix average hashrate reporting when using large -N values.0.7.2Added algo: x22iNote: if the miner crashes on x22i, decrease your overclock, the algorithm is quite "unstable"0.7.1Added algos: sha256t, timetravelReplace "--exit-on-fail-shares" parameter with "--reconnect-on-fail-shares"New/changed arguments:--temperature-start: When a GPU cools down to this temperature the miner starts using it again--exit-on-fail-shares: Now replaced with --reconnect-on-fail-shares-r (--retries): if set to 0, miner exits immediately upon the first network failure--cpu-priority: Set process priority (default: 2) 0 idle, 2 normal to 5 highestAllow C-style comments in config files (see config_example). Can be used to disable failover pools temporarily etc.A few cosmetic changes.API:Multiple http://localhost:4067/trex page enhancements, it now displays all the info you see in the console, including hashrate/power consumption on the graphs with zoom option. (click on left mouse button and drag) Don't need to use console anymore use your browser instead!New API handler "config".Some miner parameters can now be changed and saved on the fly.Please see the help file for additional details.Bug fixes:"bad weak ptr" errorShare rejects were not displayed (Suprnova, Aikapool, possibly some others)Command line arguments did not always override config file0.7.0Speed improvements: there's ~1% improvement in x16 family of algorithms on some configurations.Add support for Volta (Titan V) and Turing (20xx) cards - not optimised yet. Download CUDA 10 version to run on 20xx cards.New arguments:--temperature-limit: When a GPU reaches the temperature limit (in Celsius) the miner stops using it and keeps mining with the rest of GPUs--exit-on-fail-shares: Forces miner to immediately exit on N successively rejected shares (default: 10)Command line arguments now take precedence over config files. If an argument is set in both places, the value from cmd line overrides the config one.New HTTP API handler that allows you to control the miner via a web browser on the fly. By default is accessible at http://localhost:4067/trex. Functionality is limited but will be extended in future releases if there's demand. We're looking forward to getting your feedback.Bug fixes:Stability fixes, especially on x16r/s and bitcoreCUDA version reported by the miner is now the version that the miner has been built against rather than the one installed on user's machineRedirection of console output to stdout on Windows with no buffering in place.Cosmetic changes:Add miner efficiency (Hashes per Watt) to console output and APIPrint "Submitting found block!" message when a block is found and return this info in API0.6.10Speed improvements: x16r/s, x17, c11, bitcore, bcd, sonoa - 1-2%Add functionality for setting failover pools in cmd line by specifying -o, -u and -p arguments multiple times.New cmd line arguments:--gpu-report-interval: controls how often GPU report stats are displayed (by default every 5th share).--no-color: disable coloured output--time-limit: maximum time to mine before exiting the program.--quiet: disable GPU stats outputAdd ability to change averaging hashrate window, enable protocol dump mode, and change GPU report interval via API or web browser on the fly (without stopping the miner) - see the help file.Bug fixes:Hung/freeze issuesInvalid shares on x16rLong log path issue on Linux"extranonce subscribe timed out" on suprnova poolsCosmetic changes:Showing configured pools upon start upDisplaying colour representation of hashorders for x16r/sMiner uptime is displayed as part of GPU stats report0.6.6Speed improvements: bcd - 5%Cosmetic change: the miner will not show duplicate hashorder messages for x16r/s, bitcore, and they are no longer labeled as WARNTo disable API altogether set --api-bind-http / --api-bind-telnet to 0.HTTP API: new control command "shutdown" to quit the miner (read help file for details)0.6.5New algo: bcdSpeed improvements:x16r/s, bitcore, renesis, hmq1725 - 2-3%x17, c11, sonoa - 1-3%0.6.4New algo: hmq1725Improved x16r/s, x17, sonoa, c11, bitcore, renesis - 5-15% depending on algo and cardsBug fix: "hashrate-avr" parameter is ignored when using json config0.6.3New algos: balloon, polytimos, skunkImproved bitcore, c11, sonoa, x16r/s, x17 by a few percent. Renesis, phi - about 3-5%0.6.1New algos: bitcore, sonoa. Dropped phi2 support.Slight improvements (few %) of all algorithms except lyra2z.Added extra shares submit functionality. Reduced the number of rejects on pool side (both resulting in increased poolside hashrate).Fix for multiple scenarious where the miner used to freeze.Fix "doesn't validate on CPU" errors for phi/renesis algos.Display pool latency when submitting shares.Support decimal intensity values (e.g. 21.3)Highlight accepted/rejected shares using different colours (Windows version)Display GPU full name/temperature/power consumption/fan details.New command line option -P (stratum protocol dump).-N option now uses seconds rather than samples as a unit of measurement. E.g. -N 30 means a sliding window of 30 seconds is used to calculate average hashrate.Added support for Compute Capability 5.0 cards (e.g. 750, 750ti).HTTP API:Added GPU full name/temperature/power consumption/fan details.Added current pool details (name, difficulty etc)0.5.7Faster renesis, hsr, x16r, x16s, x17, c11. Few % improvement across all of them.0.5.6 (for those upgrading from 0.5.1)Added new algos: x16r, x16s, renesis.Faster hsr, x17.JSON API - return active pool informationAdded command line parameter "-N" - average hashrate display (number of samples in sliding window)Miner displays a notification in the console if the new version is availableBug fixes:Miner hanging on "Graceful shutdown"Config file - miner wouldn't start if no intensity specifiedTelnet API (ccminer compatible) - inconsistent newline characterHung issue (after "ApiServer: stopped listening" and connection loss)Immediate reconnect upon connection lossIncorrect initialisation when invalid command line argument supplied (now the miner won't start in that case)0.5.1Faster phi2, lyra2z, x17, c11.Added new algo HSR.Added API (HTTP JSON [preferable] and telnet ccminer compatible) - pending integration with monitoring software (ethmonitoring, awesome miner etc.)Multiple bug fixes, new config options, failover pools.0.4cAdded Phi2.JSON config file support. Multiple bugfixes.Miner source code is rewritten from scratch and no longer based on ccminer.0.3aFaster Lyra2z, Tribus and slightly faster Phi1612.Warning: If using Lyra2z in this version you will likely need to lower your overclock settings and probably also increase the power limit.0.2Added Lyra2z and Tribus.0.1Initial release. Phi1612 added.
  4. MSI Afterburner 4.6.2 Beta 1 download - Guru3D and MSI have been working hard on AfterBurner, today we release an updated this revision of Afterburner, this application successfully secured the leading position on graphics card utilities.MSI Afterburner is ultimate graphics card utility, developed by the Guru3D RivaTuner team. The Beta releases sometimes have an expiration limit, the stable and final build releases do not. We recommend using a final build. We have written a GeForce GTX series 1000 and newer overclocking guide right here as over time a number of things changed like Curve based tweaking as well as automated tweaking. Not just that, we have also updated RTSS, our statistics server that enables the overlay with MSI AfterBurner to offer DirectX 12 overlay support. Please read the full release notes for all changes (as there are quite a few of them). Have fun tweaking. Does your overlay not work anymore after an update? Please perform a full uninstall of RTSS and AfterBurner (with profiles removal) and then perform a CLEAN install of it.Download MSI Afterburner - https://mega.nz/#F!fxMQiARQ!Nsxe33NJ3HIIjzrmqqowTQVersion 4.6.2 Added new MSI Steampunked skin by Drerex design Improved skin engine: Optimized skin rendering performance for skins using multiple overlapped animated indicators Added position smoothing support to skinned indicators Now skinned applications can forcibly disable indicator animation if necessary Skin format reference guide has been updated to v1.8 to document these changes Notes on Animated Steampunk Skin - 4.6.2 is optimized to improve performance of background animation rendering of new Steampunked skin, however, skin animation can still be rather performance hungry on old slow CPUs. So keep your eyes on CPU usage when using this skin, and if it is too high for you, you may try to do the following things to reduce it: Set skin composition mode to "layered with colorkey" (the fastest one) if you were using "layered with alpha" mode. Layered skin composition mode with alpha channel is the slowest one and the most CPU hungry due to using per-pixel transparency Reduce skin scaling factor in UI properties of MSI AB, higher skin scaling values cause higher CPU load Disable animation completely, currently there is no dedicated option for it in GUI, however you can do it via editing the config and setting EnableAnimatedIndicators to 0 Version 4.6.1 Added new MSI Touch of Modern skin by Drerex design Added asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a note that only 100% NVIDIA reference design dual fan control implementations are supported, third party proprietary asynchronous fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions. The following asynchronous fan control functionality is available: Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronours fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are deprecated and no longer receive new functionality When fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the previous version, i.e. both fans are running asynchronically in default hardware automatic fan speed control mode but become linked synchronically if you enable manual or software automatic fan speed control mode When fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software automatic fan speed control mode independent temperature curves are also adjustable for each fan Improved hardware monitoring module: Inverted hotkeys handling approach for multiple selected hardware monitoring graphs. Previously single graph settings mode was active by default, but you could apply some settings (e.g. “Show in On-Screen Display”) to multiple selected graphs with <Ctrl> hotkey modifier. Now such settings are applied to multiple selected graphs by default and <Ctrl> hotkey modifier is used to apply settings to single focused graph Group operation notifier has been moved to hardware monitoring graph properties header Improved backward compatibility with monitoring profiles created in the previous versions of application. It is no longer necessary to recreate the profiles having monitoring settings without On-Screen Display layout It is no longer necessary to click <Apply> button inside the On-Screen Display layout editor after changing current layout, now the changes are applied properly on closing the editor The progress of saving multiple graphs’ settings is now displayed in the caption of the application’s property sheet Optimized handling of “dirty” flag for settings decreases saving time for multiple graph’s settings when using multiple subsequent group operations Added new “Hide attached monitoring panel” command to the context menu of hardware monitoring window. You may use it to toggle visibility of monitoring window when it is attached to the main application window Now you may press <Ctrl> + <M> hotkeys to toggle monitoring window attachment Improved voltage/frequency curve editor for both AMD and NVIDIA GPUs: Now you may hold <Shift>and press left mouse button on initial desired horizontal position in the editor window to begin fragment selection, then drag mouse cursor to desired final horizontal position and release left mouse button to select a fragment. The following functionality is available for selected fragments: You may double click the editor window to reset fragment selection You may adjust the offset for any point inside the selection with mouse cursor to apply the same offset simultaneously to all selected points You may adjust the offset for any point inside the selection with keyboard cursor keys, <Enter> or <Shift>+<Enter>keys to apply the same offset or specify the same target frequency or voltage for all selected points Improved skin engine: Skin engine no longer crashes when switching between the skins having the same site with and without alpha channel Added thumbless skinned slider controls support Added alpha path threshold support for skinned slider controls Improved skin cross-compatibility layer: Extended list of applications supported by skin cross-compatibility layer Various compatibility fixes for third party skins supported by cross-compatibility layer Fixed issue with GUI stopping responding during adjusting skin scaling ratio on the fly in high DPI mode when skin composition mode was set to layered mode with alpha Updated third party hardware database: Added new third party voltage control capable graphics cards to the database Added new third party graphics cards with multichannel GPU, memory and VRM temperature sensors to the database RivaTuner Statistics Server has been upgraded to v7.2.2
  5. If you like Minera please consider a donation to support its development: you can donate to my BTC address: 1AmREReHNLec9EaW7gLRdW31LNSDA9SGR1 NOW SUPPORTING ALSO ANTMINER S9 / S9i / Z9 / Z9 mini / V9 / L3+ / L3++ / D3 Hello there!I'm very glad to announce the first release of Minera a new web management system for your Gridseed (Mini/Blade) mining devices.Minera includes as miner software: Download Minera v.0.9.1* CPUminer-GC3355 fork* BFGminer latest original version* CGminer latest original version* CGminer Dmaxl Zeus forkIt should support every CGminer/BFGminer forks as well.Since the 0.9.x version Minera supports also network miners as:* Antminer S9* Antminer L3+* Antminer D3Since the 0.5.x version Minera supports also network miners as:* Antminer S1 / S3 / S5* Rockminer* Any network miner with cgminer/bfgminer* Other Minera systemHere you can find the complete Minera image file for Raspberry PIv0.9.1 -> Feedbacks are very welcome! If you like Minera please consider a donation to support its development: you can donate to my BTC address: 1AmREReHNLec9EaW7gLRdW31LNSDA9SGR1 Edit: 09 October 2018Minera 0.9.1 is out!* Login security bug fixed* Scan network added network to be scanned* Fixed bug preventing Minera to run in Raspberry 3 Model B+* Fixed Cgminer to allow any Antminer model with or without JSON bug (S9, S9i, L3+, L3++, D3, Z9, Z9mini, V9)* Changed way to purchase lifetime license ads-free* Fixed price for license to 50$ (can be paid with several coins now)* Local miners updated (Cgminer, Bfgminer)* Added "Futurebit Moonlander 2" custom miner Edit: 03 December 2017Minera 0.9.0 is out!* Added support for Antminer S9 / L3+ / D3* Bugs fixed* Manual install should work now Edit: 25 September 2017Minera 0.8.0 is out!* Several bugs fixed* Introduced Browser mining to remove ads Edit: 3 September 2017Minera 0.8.0 is out!* Several bugs fixed* Upgraded to lastest Codeigniter version (framework)* Upgraded to latest Raspbian Strecth release (image file)* Upgraded to use PHP7.0* Added Minera ID to lock screen and sidebar* Added BCH (Bitcoin Cash) to profitability table* Added ccminer as local miner (need tests) Edit: 14 April 2016Minera 0.7.0 is out!* Bug fix Limit on number of network miners* Enhancement: hostname/system name of miner on login/lock page* Updated miners with latest versions (Cgminer and Bfgminer)* Updated Raspbian version to Jessie Debian release (You need to flash your SD Card read more below)* Removed all save buttons and introduced the new one-save-button* Added reset logs button to clean up log system files (only Minera and miners)* Added system info at lockscreen* Changed Refresh button position (on top!)* Introduced Ads in Minera (yes I know, you don't like)* Introduced the Remove Ads button (only 0.01 Btc for system forever, read more below)* Lot of other small fixes/enhancement Edit: 07 December 2015Minera 0.6.2 is out!* This is only a maintenance version to update the dead Ghash.io Multi pool with the LTC one.* Updated Bfgminer to latest version (5.4.1) Edit: 03 July 2015Minera 0.6.1 is out!* Fixed time donation for cgminer users* Fixed Cgminer Dmaxl pool hashrate bug* Added remember dashboard panels status collapsed or not* Added dashboard panel settings enable/disable* Removed any reference to MobileMiner* Added bitstamp rates Usd + Eur in mining profitability panel* Fixed bug with update...shit! I'm sorry for this Edit: 17 June 2015Minera 0.6.0 is out!* Fixed various minor bugs* Fixed altcoin data update* Fixed change hostname* Upgraded framework version (Codeigniter from 2.1.4 to 2.2.2)* Fixed build script git clone* Fixed export JSON bug* Fixed dup labels in charts* Added local pools dashboard actions (add/remove/select on the fly)* Added default records per page setting* Added factory reset* Added general options (logs and json append) to manual local miner settings* Added logs for custom miner softwares* Added mining profitability box on dashboard* Fixed sidebar scrolling* Added sidebar dashboard icons/links* Updated Minera system ID based on ethernet Mac Address* Changed Minera username donation pool to reflect the Minera System ID* Donation profit now got from live profit data* Summer cleaning* Added bower vendor packages* Added Grunt task manager to build Minera files* Added task for minify/uglify css/js* Added environment configs* Lock and sysop pages code rewritten* Added CDNs for icon fonts (Awesome / Ionicons)* Added Lighttpd conf to compress JSON calls and different mimetypes files (only on image build)* Added script to install Minera on a non-Raspberry hardware Edit: 10 April 2015Minera 0.5.0 is out!* Ability to add network miners like Antminer, Rockminer, etc…* Ability to add other remote Minera system as network miner (this works only if the network Minera uses bfgminer/cgminer as local miner, doesn't work for cpuminer)* Automatically scan the LAN network to discover network miners* Add/Remove/Select pools on the fly for network miners* New network miners widgets* Fixed change web password* Fixed wrong current pool in Mobileminer* Ability to change system hostname from settings page* Ability to change system user password from settings page* Added option to not append the JSON conf file to the local miner command* Added Eur/Usd BTC rates* Added errors from log file if miner won’t start* Restyled dashboard page when local miner isn't running (now it shows other info also if miner is stopped or it won't start)* Added network miners to Mobileminers (you will have a new miner system for every network miner you have)* Updated Built-in local miners to the latest version* Added fix for libusb library* Added preconfigured miner options (I added several pre-configured options to the settings page so newbies have everything ready to start)* Rewrote of topbar widgets now visible on every pages* Fixed focus event on Firefox (duplicate table rows on page reload)* Updated jQuery* Lots of code rewrite Edit: 28 February 2015Minera 0.4.1 is out!* Added pool proxy setup* Added Github star button* Added algo info to the stats* Added auto switch donation pool based on algo (you can now donate mining time in SHA-256 too)* Fix sending empty stats to mobileminer* Pools bug fix* New Minera image with Raspberry PI 2 support (Please refer to this wiki page if you are updating via web) Edit: 22 December 2014Minera 0.4.0 is out!* Fixed security hole* Fixed MHz bug* Fixed simultaneous pool issue* Recoded Mobileminer actions* Improved security* hashed web password* Added Coinbase donation buttons* Ability to add custom miners* Skin selection (black/blue)* New blue skin* Minor fixes Edit: 16 October 2014Minera 0.3.8 is out!* Fixed big bug on minerStop method, it prevented every miner excluding cpuminer from stopping* Updated Bfgminer/Cgminer to latest versions Edit: 10 October 2014Minera 0.3.7 is out!* Fixed MobileMiner SHA256 bug* Updated Bfgminer/Cgminer to latest versions Edit: 29 September 2014Minera 0.3.6 is out!* Updated miner binary files* Small fixes* Added script to build miner Edit: 19 August 2014Minera 0.3.5 is out!* Added switcher instead checkbox* Added export/import complete system settings* Added save/load/share miner configs* Fixed issue with cgminerStartupScript* Updated BfGminer to 4.7.0 and CGminer to latest commit* Added fixed header* Many minor bug fixes Edit: 03 August 2014Minera 0.3.4 is out!* Fixed big bug causing saved data lost if reboot, now each saves have a Redis BGSAVE included to persist the data in the disk immediately* Added ability to start the miner process as superuser/root instead the minera one, this could be useful for some kind of devices that need access special stuff in the system* Updated Bfgminer to 4.6.0-6-g8f60a5f and Cgminer to 4.5.0 Edit: 29 July 2014Minera 0.3.3 is out!* This release just updates Bfgminer and Cgminer to their latest relative versions.* Reverted Cgminer Dmaxl Zeus fork to support Zeus & Gridseeds (Note, there are known Edit: 21 July 2014Minera 0.3.2 is out!* Added MobileMiner actions start,stop,restart,switch* Added send anonymous stats* Added temp/freq when available* Fixed logging with cgminer and forks* Fixed pool hashrate dmaxl* Updated Bfgminer and Cgminer-Dmaxl to latest versions* Added reset buttons* Many bugs fixed Edit: 15 July 2014Minera 0.3.1 is out!* Several bugs fixed after 0.3.0 release* Added web terminal window to login into the system directly from the dashboard Edit: 14 July 2014Minera 0.3.0 is out!* Added miner software switcher* Included CPUminer, CGminer, BFGminer, CGminer Dmaxl Zeus fork* Added scheduled event (reboot/restart)* Added ajax methods for save settings and miner actions* Various bug fixes Edit: 04 July 2014Minera 0.2.3 is out!* Added digital clock* Fixed Cryptsy timeouts* Added pool donation remove button* Changed frequency step from 5 to 1* Fixed display devices legend* Added avg stats 1min,5min,1hour,1day* Added charts hourly,daily,monthly,yearly* Added average stats badge* Various bug fixes Edit: 16 June 2014Minera 0.2.2 is out!* Added donations time based* Added temperature scales C°/F°* Added sortable box for touch devices too* Added earnings calculator to the dashboard* Increasead altcoins to 5* Added lockscreen autofocus* Javascript code rewriting may be fixed datatable random issue (?)* PHP code rewriting to add BFGMiner/CGMiner support* Added credits in README* Various fixes Edit: 11 June 2014Minera 0.2.1 is out!* Added custom altcoins rates (go to settings and choose your preferred ones, max 3)* Added autorestart if there are X devices possible dead (go to settings and enable it, if X devices won't send shares for over than 10 minutes miner will be restarted)* Added fixed Minera donation pool (Don't panic! This doesn't mean there is a Minera "fee", you can still add as many pools as you want and keep the minera's one for last)* Removed url pool check when adding a new one (you can put any string you want as Pool url)* Added system uptime* only on fresh install - Added wicd-curses package to easily manage WiFi cards (if you wanna have it just run: sudo apt-get install wicd-curses)
  6. Downloads Windows Download (CUDA 9.1 version) (CUDA 9.2 version) (CUDA 10.0 version) Overview CryptoDredge is a simple in use and highly optimized cryptocurrency mining software. It takes full advantage of modern NVIDIA graphics cards through the use of unique optimization techniques. We have also devoted great attention to stable power consumption. These benefits, along with the very small developer fee, make our product one of the best publicly available miners. Devfee Developer fee is 1% (2% for MTP) Supported Algorithms Allium Argon2d (250/4096/DYN/NIM) BCD BitCore CryptoLightV7 (Aeon) CryptoNightFastV2 (Masari and Stellite) CryptoNightGPU CryptoNightHaven CryptoNightHeavy CryptoNightSaber (Bittube) CryptoNightTurtle CryptoNightV8 Cuckaroo29 (Grin) CuckooCycle (Aeternity) HMQ1725 Lyra2REv3 Lyra2vc0ban Lyra2z Lyra2zz (LAPO) MTP (see the MTP Algorithm item) NeoScrypt Phi2 Pipe Skunkhash Tribus X16R X16RT X16S X17 X21S X22i QuickStart The current version of CryptoDredge is a (portable) console application. Unpack the downloaded archive and edit one of the sample .bat/.sh files or provide the necessary command line arguments. Example: Code: CryptoDredge -a <ALGO> -o stratum+tcp://<POOL> -u <WALLET_ADDRESS> -p <OPTIONS> Command-Line Arguments -v, --version Print version information -a, --algo Specify algorithm to use aeon aeternity allium argon2d-dyn argon2d-nim argon2d250 argon2d4096 bcd bitcore cnfast2 cngpu cnhaven cnheavy cnsaber cnturtle cnv8 cuckaroo29 hmq1725 lyra2v3 lyra2vc0ban lyra2z lyra2zz mtp neoscrypt phi2 pipe skunk tribus x16r x16rt x16s x17 x21s x22i -d, --device List of comma-separated device IDs to use for mining. IDs are numbered 0,1...,N - 1 -h, --help Print help information -i, --intensity Mining intensity (0 - 6). For example: -i N[,N] (default: 6) -o, --url URL of mining pool -p, --pass Password/Options for mining pool -u, --user Username for mining pool --log Log output to file --no-color Force color off --no-watchdog Force watchdog off --no-crashreport Force crash reporting off --cpu-priority Set process priority in the range 0 (low) to 5 (high) (default: 3) --api-type Specify API type to use (default: ccminer-tcp) ccminer-tcp (TCP) ccminer-ws (WebSocket) off -b, --api-bind IP:port for the miner API, 0 disabled (default: -r, --retries N number of times to retry if a network call fails, -1 retry indefinitely (default: -1) -R, --retry-pause N time to pause between retries, in seconds (default: 15) --timeout N network timeout, in seconds (default: 300) -c, --config JSON configuration file to use --no-nvml Force NVML off --hashrate Expected hashrate in kh/s (argon2d-nim only) (default: 100) System Requirements NVIDIA GPUs with Compute Capability 5.0 or above. MTP require graphics card with at least 5Gb memory. Latest GeForce driver 2 GB RAM (4 GB recommended). Some algorithms such as NeoScrypt require the virtual memory (swap file) with the same size as all of the GPU's memory. Internet connection Windows Windows 7/8.1/10 (64-bit versions) Visual C++ Redistributable for Visual Studio 2015 Linux Ubuntu 14.04+, Debian 8+ (64-bit versions) Package libc-ares2. Installing libc-ares2 package is as easy as running the following command on terminal: apt-get install libc-ares2 Notes Antivirus Software Reports CryptoDredge is not a piece of malicious software. You may try to add an exception in antivirus software you use. Rejected Shares There are many reasons for rejected shares. The primary reasons are: high network latency overloaded mining server aggressive graphics card overclocking Watchdog If you are using a third-party watchdog, you can disable the built-in watchdog by using --no-watchdog option. Example: Code: CryptoDredge -a <ALGO> -o stratum+tcp://<POOL> -u <WALLET_ADDRESS> --no-watchdog Several Instances After a While It seems that you are using an own restart mechanism of CryptoDredge (see the Watchdog item). Crash Reporting If the built-in watchdog is enabled then CryptoDredge will generate and send us the report. You can disable error reporting with --no-crashreport option. Allowing CryptoDredge to send us automatic reports helps us prioritize what to fix and improve in the future versions. Crash reports won't include any personal information about you, but they might include: Operating System version Driver version Miner configuration Application crash data MTP Algorithm System Requirements: GPUs with at least 5 GB of memory There are no special CPU and RAM requirements, 4 GB must be sufficient In comparison to other algorithms, MTP requires transferring large amounts of data to the pool. This may be a problem for limited and slow connections. The miner has to do some extra work every time that the pool sends a new "job", so an average hashrate will be a bit slow. Developer fee is 2% for MTP. Argon2d (NIM) Algorithm If you encounter many "invalid share: invalid pow" errors from the pool, set --hashrate option to calculate the start difficulty.
  7. ################################################# # dstm's ZCash Cuda miner #################################################I've written it initially for my own purpose. It performs pretty well - so here it is. Compatible with devices having Compute Capability 5.0 and greater i.e. it should run fine on Maxwell/Pascal GPUs.Supports every server using the stratum protocol. If you have issues with certain pools pls. report them here.Contains 2% devfee. Suggestions are welcome.Download: Zcash Nvidia_Miner v0.6.2Version 0.6.2 update:- fix ssl handshake failures- fix device selection bug introduced in 0.6.1- make linux performance improvements introduced in 0.6.1 optionalvia 'mq-solver' parameter (due to issues on some systems)- improve device initialization on large systems Linux x64: Download Zcash_Nvidia for LinuxWin x64 v0.6.2:Download Zcash_Nvidia for WindowsPerformance:1080Ti 725-740 Sol/s1070 440-450 Sol/sstock settingsUI:Sample output mining on a rig with 8 GPUs.GPU0-7: 1070Ti Code:> GPU0 65C 75% | 507.9 Sol/s 504.9 Avg 269.8 I/s | 4.52 S/W 112 W | 3.74 100 39 ++++++++> GPU1 64C 70% | 508.4 Sol/s 509.1 Avg 273.0 I/s | 4.57 S/W 111 W | 4.11 100 38 +++++++++> GPU2 62C 70% | 512.9 Sol/s 514.0 Avg 274.0 I/s | 4.60 S/W 110 W | 2.62 100 37 +++++> GPU3 61C 70% | 502.4 Sol/s 500.8 Avg 266.9 I/s | 4.48 S/W 113 W | 2.24 100 38 ++++++++*> GPU4 64C 70% | 508.6 Sol/s 508.2 Avg 272.9 I/s | 4.53 S/W 111 W | 1.49 100 38 ++++++++++++> GPU5 57C 70% | 506.7 Sol/s 504.7 Avg 270.0 I/s | 4.53 S/W 110 W | 1.94 100 38 ++++++++++> GPU6 59C 70% | 514.5 Sol/s 506.3 Avg 270.4 I/s | 4.55 S/W 112 W | 2.36 100 38 ++++++> GPU7 64C 75% | 511.1 Sol/s 515.1 Avg 275.2 I/s | 4.62 S/W 109 W | 1.12 100 37 ++++++++> ============== | 4072.6 Sol/s 4063.3 Avg 2172.1 I/s | 4.55 S/W 891 W | 19.63 100 37 ++++++++++Sol/s: solutions per secondAvg: average solutions per secondI/s: iterations per second done by the GPUS/W: efficiency - average Sol/s per WattW: power consuption in Wattlast 3 colums: <shares per minute> <accepted shares ratio> <network latency in ms>> : indicates that a new job was received+ : indicates one submitted share* : indicates one submitted dev fee share= : sum/average if mining on multiple GPUsFeatures:To get help just start zm without any argumentsCode:ZM 0.6.2, dstm's ZCASH/Equihash Cuda MinerUsage:zm --server hostname --port port_nr --user user_name[--pass password] [options]...zm --cfg-file[=path]Stratum:--server Stratum server hostnameprefix hostname with 'ssl://' for encryptedconnections - e.g. ssl://mypool.com--port Stratum server port number--user Username--pass Worker passwordOptions:--help Print this help--list-devices List available cuda devices--dev Space separated list of cuda devices to use.If this option is not given all available devicesare used.--time Enable output of timestamps--color colorize the output--logfile [=path] Append logs to the file named by 'path'If 'path' is not given append to 'zm.log' incurrent working directory.--noreconnect Disable automatic reconnection on network errors.--temp-target =dev_id:temp-target[,dev_id:temp-target] ...In C - If set, enables temperature controller.The workload of each GPU will be continuouslyadjusted such that the temperature stays aroundthis value. It is recommended to set your fan speedto a constant value when using this setting.Example: --temp-target=0:65,2:70--intensity =dev_id:intensity[,dev_id:intensity] ...Reduce the load which is put on the GPU - validintensity range ]1.0-0.0[.Example: --intensity=0:0.893,2:0.8--telemetry [=iport]. Starts telemetry server. Telemetry datacan be accessed using a web browser(http) or by json-rpc.If no arguments are given the server listens on127.0.0.1:2222 - Example: --telemetry= port range [1025-65535]--cfg-file [=path] Use configuration file. All additional commandline options are ignored - configuration is done onlythrough configuration file. If 'path' is not givenuse 'zm.cfg' in current working directory.--pool =hostname,port_nr,user_name[,pass]Setup additional failover pools.Example:zm --server servername.com --port 1234 --user usernameBIG THANKS TO SWISSTRADER for providing access to hardware.Dependencies Linux:openssl 1.0 (for versions <= 0.5.7)Windows:.Net 2.0+Version 0.6.2- fix ssl handshake failures- fix device selection bug introduced in 0.6.1- make linux performance improvements introduced in 0.6.1 optionalvia 'mq-solver' parameter (due to issues on some systems)- improve device initialization on large systemsVersion 0.6.1- fix failover-pool not switching back on ssl errors - fix failover-pool not switching back on some servers - add support for stratum's client.reconnect rpc- support configuration of 'temp-target', 'intensity', 'pool' via cmd-line parameters- report current difficulty and target on term-ui- sort output by gpu_id on term-ui- colorize temperature above 70°C on term-ui- report intended fan speed on term-ui, web-ui, json-rpc- report power consumption on term-ui- improve performance on linux systems by ~2%Version 0.6- failover pool support- introduce configuration file- introduce intensity option- support per gpu temp-target via cfg-file- support per gpu intensity via cfg-file- json-rpc report gpu_name, pci_bus_id, pci_device_idgpu_uuid- improve error reporting- improve handling of invalid server resposes- improve reconnection in cases where servers become reachable but respond with malformed data- ui: add colorized output- web-ui: use dark colorsVersion 0.5.8con: add support for protocol v.01000020 link openssl staticallyVersion 0.5.7reduce cpu loadminor performance improvementscon: use single pool connectioncon: ssl: clear session data before reconnectnvml: handle invalid valuesVersion 0.5.6reduce cpu loadminor performance improvementsVersion 0.5.5con: handle failure of dev share poolcon: disable reconnect limitlogfile: disable bufferingVersion 0.5.4fix: device selectionfix: latency reportingadd logfile supportadd option to disable auto reconnecthandle disconnect periods in web/json statsadd basic GPU responsiveness infrastructureui: change timestamps to ISO 8601 formatwebui: report: uptime contime server user portjson: report: uptime contime server user port versionVersion 0.5.3cpu: reduce cpu loadcon: fix recon loopcon: network latency measurementui: add accepted/rejected shares ratioui: add network latencyui: add information about selected devicesVersion 0.5.2fix a race that might have corrupted sharesnet: tcp: disable the Nagle algorithmwhich reduces network latency in some circumstancesnet: lower keepalive for nat-networksVersion 0.5.1con: fix reconnection might have give up too earlycon: enable TCP Keepalive to prevent nat-routers fromdropping the connection.ui: output rejected sharesui: optional output of timestampstelemetry: make web ui mobile friendly + add share statstelemetry: json: add more GPU statsVersion 0.5con: support set_extranonce rpccon: improve handling of temporary slow network conditionscon: add monitoring support using web browsercon: add monitoring support using json-rpcmp: rebalance queue sizes - this improves the solution rate asseen by the pools, especially on pools that submit new jobs oftenVersion 0.4.5fix: bad miner performance when using --temp-targeton systems with many GPUsreduce temperature controller cpu usageVersion 0.4.4fix: Sol/W might have produced wrong valuesfix: Sum not shown if --dev was usedfix: memory leak on reconnectionimprove stabilityVersion 0.4.3stratum: support more poolsui: flush stdout streamcon: improve reconnectionsperformance improvements 0.3-0.5 %Version 0.4.2mp: more accurate time measurementsui: calculate efficiencyVersion 0.4.1improve performanceVersion 0.4.0temperature controller addedcpu: reduce CPU usagecon: improve pool supportminor performance improvementVersion 0.3.2mp: improve stabilitycon: support more poolscon: more robust reconnection support for unreliableservers which often drop the connection ui: report GPU temperatureVersion 0.3.1cpu: reduce CPU usageVersion 0.3con: support encrypted connectionsVersion 0.2.2con: Miner reconnects automatically on connection loss now, e.g. on DSL-disconnects / public IP-changes UI: report submitted devfee-sharesVersion 0.2.1Performance improvements: - about 4% on Maxwell - about 1% on Pascal Version 0.2- Improved pascal perfromance. - Added support for concurrent mining on multiple GPUs.- Be asynchronous where possible.- Security work
  • Create New...